The Populations Future in the Homeless Shelter Assignment - 1

The Populations Future in the Homeless Shelter - Assignment Example This paper illustrates that experiences of the subpopulation, which identify barriers to change in the people’s lifestyle, explain Declan’s position that the group of people has a limited chance of escaping homelessness. Financial barriers are one reason because while people of the low economic class are homeless, as malnutrition among the subpopulation suggests, health complications such as communicable diseases and chronic diseases further burden members of the subpopulation and they have to spend their limited earnings on healthcare. Drug abuse, another major challenge that the subpopulation faces, also constrains the people’s financial stability and therefore limit their chances of affording shelter. Members of the subpopulation also report cases of mental illness, a condition that reduces a person’s rationale to the extent of not perceiving benefits of living in a home. Declan, therefore, knows that the population has a limited chance of escaping home lessness because of the characteristics of the population that sustain the homelessness condition. Depression disorder is the mood disorder to which Declan should pay particular attention when assessing his clients because of the relatively high significance of the disorder among the subpopulation, relative to other disorders. Maurer and Smith identify the significance of the disorder among homeless people, report an incidence rate of about 50 percent and recommend that care personnel that works with the subpopulation should occasionally assess for depression. Empirical data on mood disorders also identifies relative significance of depression disorder over other mood disorder. A study by Hodgson, Katherine, Shelton, Marianne, Bree, and Los also identifies the significance of depression as a mood disorder. While considering the prevalence of three mood disorders, the authors only identify the prevalence of depressive disorder over a week’s interval with zero percent prevalenc e rate for dysthymia and bipolar I-II disorder.

Koalas Essay Example for Free

Koalas Essay Obamacare, or what is formally known as the Patient Protection and Affordable Care Act, is federal legislation that was signed into law on March 23, 2010 by present Barak Obama. The act aims to reform national healthcare and give more people than before access to affordable healthcare. The overall goal of the act is to cover all persons regardless of their conditions or other factors. The passing of Obamacare has led to much conflict in the government and throughout the nation. In particular, recently the act has been the root of heated disagreements and government unrest among the Democrats and Republicans. Obamacare, or the concept of a nation or statewide healthcare program, is not the first of its kind. The idea dates as far back as 1989 when it was proposed to Congress. Bill and Hillary Clinton had a similar objective in the 1990’s and Mitt Romney made similar reforms in 2006 while the governor of Massachusetts. The Clinton’s health care plan was similar to Obama’s in that they were national campaigns to provide universal healthcare. Also similar was the amount of controversy both drew up in the House as well as with the American people. The newly imposed ACA has many areas in which it aims to help those who cannot afford healthcare as well as better the healthcare system in the country as a whole. The main point of Obamacare is guaranteed issue of healthcare to all people and prohibits the denial of healthcare based on prior conditions. One benefit of Obamacare is allowing children to stay on their parents’ healthcare plan until age 26. Along with guaranteed coverage, Obamacare will institute an exchange so individuals can compare prices of private insurances and purchase insurance. It is estimated that over 15 million men and women will be eligible for purchase of healthcare. Families that fall within a certain distance to the poverty line will be compensated for choosing a policy using this exchange. This is an incentive for people to utilize this plan and purchase healthcare. On the business side of things, Obamacare also pushes towards the nationalizing of healthcare. There are penalties for businesses who employ over 5o employees and do not provide healthcare. Overall there are several efforts made in many areas of the country to push for healthcare for everyone in the United States. There are many areas in which families and individuals can benefit from the Affordable Care Act. According to ObamacareFacts, Americans making less than $45,960 or families making under $94,200 are eligible for free or low-cost insurance. Also, as a result of  Obamacare 24 million people will be exempt from the Individual Mandate which requires the purchase of health insurance. It is noted that anyone who feels they cannot afford healthcare will be covered under Obamacare and granted low-cost or free insurance. Dating back to 2008 the Democrats and Republicans had been on different sides of the national healthcare debate. The senate was close to passing the bill to reform healthcare in 2009. The Democrats needed 60 votes to pass, but due to a series of events leading to some members not supporting the bill or not voting, the act was not passed. After further delegation, what previously was a disagreement of terms and conditions had Republicans and Democrats in stark opposition to one another. All Democrats were strong supports of the bill and Republicans adamantly opposed. Now, it is clear the side the Democrats take on the Affordable Care Act. The real question is, why do Republicans oppose what appears to be such a proactive and achievable goal? The topic is an intriguing one, and one that does not have one definite answer. The Republicans themselves say nothing more than that Obamacare will destroy the country. Such a powerful accusation yet no real explanation or further comments lead only to more questions than answers on their true position. There are arguments that say the ACA is detrimental to the economy, and that businesses cannot afford to spend any more money on healthcare. Another claim was that Obamacare was unconstitutional, although the Supreme Court overruled this idea. Sources outside the Republican Party see the Republicans’ dislike of Obamacare solely because they dislike Obama himself. They appear to be against Obamacare simply just to be again st Obama. Another theory is the tax increases that would come along with Obamacare. One New York Times article highlights the â€Å"real reason† as to why Republicans are opposed to the Affordable Care Act. Eduardo Porter claims that Republicans are actually afraid that the American people will like Obamacare. They do not want the US population to realize that it will not actually destroy the economy and it can actually improve the lives of many people, many Republicans to be more specific. They are fearful of the positive impacts it could have on supporters of the Republican Party. One common problem many Americans admit to having with Obamacare. The nickname Obamacare is a point many people cannot get past, and when asked if they support it or not many say they do not. But the overwhelming majority of Americans agree with the actual terms  of the ACA and the steps it takes to better healthcare in the US. It could be that the simple concept of a nickname could be the main problem people have with an overall positive proposal. Although Obamacare itself has been spread out to institute new laws and regulations over the next 5-10 years, the effects of some of the early plans have already been present. ACA has already impacted the number of insured Americans and that amount is expected to continue to rise. Another change that has already been made is regarding dropping policy holders. No longer are insurance firms allowed to drop policy holders due to sickness or injury. Perhaps the most noticed and controversial part to date is the increase in healthcare costs and its effects on the national budget. The national debt limit has been a very sensitive topic and the affect Obamacare will have on it is not helping the problem. It needs to be determine the lengths necessary to go in order to make healthcare nationally available yet not impact the national debt in a way as to cause economic unrest. With a plan that has stirred up so much unrest in its early days, the future does not bode well for Obamacare. Johnathan Oberlander of the New England Journal of Medicine argues that many of the problems that the Affordable care act faces today will not be present once the act is more establis hed in several years. Once the disagreements on the actual passing of the bill fade, in come the disputes about what the act does and does not do and the boundaries of the laws. â€Å"Perhaps the most difficult long-term challenge facing Obamacare is cost control† (Oberlander, New England Journal of Medicine). Cost control is a serious issue that is seen to be a point of major contention in the future due to the lack of limits on spending. Another negative aspect of Obamacare is the affect it will have on our country in the global scheme of things. The spending on healthcare in the United States makes up 35% of the national spending, a whopping $1.38 trillion (Boot, Wall Street Journal). Much different than a time when the majority of spending was allocated to war or national security, many Americans now worry about the extent of healthcare costs in relation to other costs. Globally we are seen as a significant power, but with so much of our money dedicated to healthcare people are concerned for th e safety and protection of our nation. Along with the healthcare protection of Obamacare comes the increase in government spending, and with that comes the alarming reality of less and less spending on our national  security. In my opinion Obamacare is a very beneficial planned instituted by the government that receives an unnecessary and unfair amount of criticism. The Kaiser Health Tracker poll asked Americans whether or not they supported Obamacare and the majority were against it. However, the poll also showed that 88% were in support of tax credits, 76% in favor of expanding the coverage age of children to 26, and 71% and 66% in favor of expanding Medicaid and banning exclusions for preexisting conditions respectively. This shows that people are unfairly judging Obamacare, whether that be because of the nickname given to it or because it is President Obama’s plan. I feel that the overall objective of the plan is one that should not be so vehemently disputed and put down by Americans and other political parties. The goal of achieving a nationally supported healthcare is a very positive one that should be supported by anyone who is in favor of the well-being of our country.

Battle of Gen X and Gen Y Essay -- essays research papers

The Battle of Gen X and Gen Y There ¡Ã‚ ¦s no doubt about it, the newest diversity issue in the workplace is age diversity. Many organizations have finally figured out how to recruit young talent only to watch them drive down a collision course with seasoned employees over issues like work ethic, respect for authority, dress code and every work arrangement imaginable. And they're not sure what to do about it.   Ã‚  Ã‚  Ã‚  Ã‚  With this paper, I decided to take this concept because of the people that I have to work with on a continual basis. They are usually people from the Generation X trying to communicate with Generation Y. Just the other day I heard from someone I am working with,  ¡Ã‚ §Those god d*&# young kids don ¡Ã‚ ¦t want to work. Then they have to ask  ¡Ã‚ ¥Why do I have to learn this anyways? ¡Ã‚ ¦Ã‚ ¡Ã‚ ¨ I just sit back, smile, and think to myself there has to be an easier way in getting the information highway open to people no matter what the age. Good communication skills are essential to get any message across and there are many times our verbal and written messages are not received and interpreted as intended. That is why I chose to look at the Generations of X and Y. I first had to define what a generation is. A generation, loosely defined, is a group of people who can be demographically identified by biological trends and have shared experiences (Stephens Generation X Site, 2004). I did a little research first on the Generation Y babies (1980-1994). These young adults are in a league all their own. This generation has a hopeful outlook, a determined work ethic, and gets turned off by promiscuity (Mcai-mn.org, 2004). This generation also likes a direct communication approach. No surprise, they get along well with the over sixty generation. They have a global perspective, and this may be due to the pace of technological change in the last twenty years that promotes communication without barriers. When you look at this group closer, they are able to adapt rapidly, innovate constantly, accept others easily and rebound quickly. They have the time, tools, and the talent to create a better world and better results. Now those Generation X ¡Ã‚ ¦s have there own fond little quirks too! They were brought up on television, Atari 2600s and personal computers. They are the generation that was raised in the 1970s and 1980s, and saw this country undergo a selfish... ... 30 years of age. Considering that the average starting salary of a college graduate in 2000 hovered around $38,000, while more and more organizations are figuring out ways to flex schedules, work locations, and job descriptions, Gen Yers may be more realistic than those who scoff at their ambition. I haven ¡Ã‚ ¦t found out yet if it has worked or not. I am sure hoping it is because when researching this topic it brought me to my own realizations on what I expect. I need to place more value on asking people what they expect instead of placing my own biases on what I think they want. Reference Page Business Week Online Official Website. Managing Generation X ¡XPart One on September, 2001. Retrieved on March 5, 2004 from http://www.businessweek.com/smallbiz/content/sep2001/sb20010928_113.htm Jennifer Jochim, Outpost Contributor. Reality shreds myths about Gen X. Retrieved on March 5, 2004 from http://www.jour.unr.edu/outpost/specials/genx.overvw2.html MCIA official website. Retrieved on March 5, 2004 from http://www.mcai-mn.org/resources/articles_generations_0412.html Stephen ¡Ã‚ ¦s Generation X site. Retrieved on March 5, 2004 from http://users.metro2000.net/~stabbott/genxintro.htm.

Critical Thinking Part

Application and Critical Thinking Most crime labs In the U. S. Are funded & operated by the gobo and provide services free to police and prosecutors. Great Britain uses private labs that charge a fee for services and keeps any profits they make. What are some potential strengths and weaknesses of each system? One potential strength for the U. S. For being funded and operated by the gobo and providing free services for the police and prosecutors Is that they do not have to worry about funds.The police and/or prosecutors can approach the crime labs they deed and ask for which ever tests they need to be performed and get them done, how ever many times. A potential weakness of this system could be that the information could be skewed being that it is run by one particular agency, another weakness is that the gobo isn't making any money like the agencies in Great Britain. In Great Britain, they are getting paid to do a Job, they would want to do the Job well and In a timely manner.In the U. S. , they not getting paid, so why would they rush to get It done? They can tea their time solving things or getting the tests completed. On the aside, the police and prosecutors have access to, free of charge, all of the services the U. S. Crime labs provide: FBI, DEAD, TAFT, US Postal lab, to name a few. A strength for Great Britain using private labs is that it's not being interfered with by the government, It was paid to do a job, it will get the Job done.On the down side, this type of system expects to be paid, so if a small area can not pay for the types of help they are In need of, the crime lab will not be able to provide help with the crime investigation. 2. Police investigating an apparent suicide collect the following items at the scene: a tote purportedly written by the victim, a revolver bearing very faint finger prints and traces of skin and blood under the victim's fingernails. What units of the crime laboratory will examine each piece of evidence?The unit that wou ld examine the note would be the Document Examination Unit. This unit studies the authenticity of handwriting and typewriting on the documents in question. The revolver will be examined by the Firearms Unit as they are able to detect residue from firearms, discharged bullets, shotgun shells, cartridge cases, and other types of ammunitions. They examine all firearms and are able to approximate he distance the weapon was fired from the target. The revolver will also also be examined by the Latent Fingerprint Unit because it has a very faint fingerprint on it.The Biology unit will examine the traces of blood and skin found under the victim's fingernails. This unit is staffed with many biochemists and biologists that are trained to perform DNA profiling on body fluids, dried bloodstains as well as skin. Crime scene instead of a patrol officer or detective. One of the advantages of having an evidence collection unit process a crime scene over a patrol officer or a detective is that the e vidence collection unit have properly rained staff technicians on the ready 24 hours a day to arrive at a crime scene to collect evidence.Another advantage is that these technicians are trained recognize and to collect/gather important physical evidence at the crime scene where as a detective or a patrol office may not have such a keen eye for such things. A third advantage for having evidence collection units process a crime scene is that the technicians are trained to work with all the special lab equipment in order to help process the evidence. This helps them to become experts in their field as they are exposed to the equipment 24 hours a day, having all the supplies and tools for proper evidence collection and packaging which allows for future examination. . What legal issue was raised on appeal by the defense in Carl Spooling's Florida murder trial? What court ruling is most relevant to the decision to reject the appeal? Explain. The legal issue that was raised while on appeal was that could the defendant be convicted of murder based on a series of tests designed specifically for this one case because the tests had not yet â€Å"gained general acceptance† across the toxicology profession. The court believed that these tests, though they are new, are important to the case and are admissible and doesn't make the crime of murder any less of a crime.Rule 702 is most relevant, in this case, to the decision to reject the appeal because Rule 702 deals with the â€Å"admissibility of expert testimony. † The testimony from qualified experts (the witness); by skills, training, knowledge, experience, or education, is based on gathered data and/or sufficient facts. The testimony must be produced from methods and principles of reliability, and finally, the witness must use and apply the methods and principles reliably to facts of said case.

Safeguarding the welfare of children

Parents with less money may also find it hard to afford the right food or not a lot of food which some children end up going to school with no breakfast this may lead to poor diet and health. B. Educated parents. If a child is brought up with well-educated parents this can take over a child's life this can have a big impact on their social life as the parents may have the child taking a lot of extra lessons for example piano lessons or dance lessons pushing them to be the best they may not realize that the child is emotionally and physically drained but not wanting to disappoint the child carries on.The child may feel left out in the fact that their friends are out enjoying life and having fun and they are missing out on heir childhood. The child may not be as intelligent as their parents and finding it hard or stressful that they are struggling with work because they don't want to fail their parents. A child with less educated parents may be struggling with school work or home work as their parents can't help them with studying they may also not care about the child's education because they may not have been brought up to care by their parents.C. Lone parent. A single working parent has less time for their child especially if they are siblings it ill be hard for them to give equal time to all children. This may affect the child's behavior as they may see this as an opportunity to take advantage of the situation they may bunk off school or start hanging around with the wrong crowd or Cumming in late. Emotionally this may leave them feeling left out and doing bad things such as thieving thinking this is the only way they can get your attention.They could start to fall behind at school because their parents aren't involved enough and not giving them the encouragement they need. The child may have also had to grow up quicker asking their own tea maybe dropping off and picking up siblings why the parent is at work meaning they don't have a social life because their caring for their brothers or sisters. The positive side to a working parent is that the child's education may be better like being in a private school, also the child more than likely doesn't go with out when it comes to new things for example clothes, laptop etc.A single parent on benefits may have all the time in the world for their children, giving the child less opportunity to bunk off school or fall behind with work but the child may be less ordinate when it comes to clothes and gadgets which may lead to the child being bullied and not fitting in socially with their peers this may lead to the child falling behind on work as they can't concentrate feeling like they don't want to be in school where these bullies are. B) Health A. Over weight.A child over weight through genetics not self-inflicted may struggle with day to day tasks such as struggling to get there selves dressed or even the simple task of going up and down stairs or doing pee at school. This may affect them emotio nally because asks are more difficult to do leaving them to feel self-conscious and upset, this may cause bullying affecting their social life as they may find it hard to go swimming or bike riding leaving them with not many friends. Their behavior may be that they are very quiet and sit away from everyone or they may act out and become the bully so they don't get picked on.Their parents may be supportive or they could be pushy towards the child to lose weight making the child feel like they have no one to turn to. B. Young career. A child looking after a parent may look strong on the outside but may feel very tired ND fragile on the inside struggling to cope but putting the brave face on as they love their parent and feels this is their duty. Their education may be falling behind as they are missing days off school or struggling to focus maybe falling asleep in class.Emotionally they maybe blank on the outside and not letting anyone in , but inside all they want is a brake to be a child with friends, socially they probably don't have many friends due to the fact that their missing school and when they are at home they can't go out because their caring for their parent. They may get bullied because they not play out with the other children and they pick up on the fact that the child is different to them affecting the child's behavior they may act out in frustration to release stress or Just shut themselves off from others.C. A child with disability. A child with a physical disability such as not being able to move will have all the emotion and intellect on how they feel and think but won't be able to show them physically. They will more than likely be at a special need school which will have group activities and learning methods tailored to their needs but they can't do every says task such as getting dressed or feeding themselves. This will be emotionally frustrating for the child knowing what they want to do in their head but can't act it out physically.Soci ally they may have special groups they can go to but they won't be able to go out and do every day things like other children. This may leave them to act out by shouting and showing their angry through facial expressions. A child with a mental disability might not understand how to behave if their withdrawn and don't communicate with family or friends. Or they act out with anger shouting and being hysterical towards others. Intellectually they may struggle to learn anything as they don't have the ability or find it hard to remember or focus.They will also more than likely go to a special need school which they will have learning tailored to their needs; they will be able to move around and play but may not understand the concept of games and group activities. Socially they may find it hard to play or communicate with others leaving it hard to have many friends. C) Environment. A. Deprived. A deprived area may have fewer amenities such as Just a corner shop. They may not have anythin g for children to burn some physical energy off for example a park, library or swimming facilities.This will affect the social behavior in this area such as vandalism, graffiti and theft. In deprived areas you may find that are different ethnic and religious families which may mean feuds or language barriers. Not having a library or other amenities may affect their intellect as they don't have the tools there to help them learn. B. Peer. As a child straight away you find that they make friends and become a group or gang hose friends can be from school or their estate they live on it can also depend on the ethnic origin or religion.Being with certain friends may lead the child to truant or drink and take drugs or it may come from their parents if they have friends round all the time drinking etc. Depending on your family or friends you may fall behind in work if they aren't committed to the work or committed to helping you with the study. C. Community. If a community doesn't have the right amenities for example a corner shop they may struggle to get groceries and bits if they can't afford to travel far, which may affect heir health or diet.Also if the community don't have a library with the computers or community centre the community would suffer because they wouldn't have the help to study and better their selves for a Job not many families have internet so these are a great help also this could affect their behavior and their intellect as they have nowhere to go to study or to take themselves away from gang culture etc. Not having a park or a swimming baths may affect their social behavior as there is nowhere for the children to go to hang out and play.

Pablo Picasso Essays - Pablo Picasso, Art Movements, Modern Art

Pablo Picasso Essays - Pablo Picasso, Art Movements, Modern Art Pablo Picasso Pablo Picasso Picasso, Pablo Ruiz y (1881-1973), Spanish painter and sculptor, is considered one of the greatest artist of the 20th century. He was a inventor of forms, innovator of styles and techniques, a master of various media, and one of the most prolific artists in history. He created more than 20,000 works. Training and Early Work Picasso was Born in Mlaga on October 25, 1881, he was the son of Jos Ruiz Blasco, an art teacher, and Mara Picasso y Lopez. Until 1898 he always used his father's name, Ruiz, and his mother's maiden name, Picasso, to sign his pictures. After about 1901 he dropped Ruiz and used his mother's maiden name to sign his pictures. At the age of 10 he made his first paintings, and at 15 he performed brilliantly on the entrance examinations to Barcelona's School of Fine Arts. His large academic canvas Science and Charity (1897, Picasso Museum, Barcelona), depicting a doctor, a nun, and a child at a sick woman's bedside, won a gold medal. Blue Period Between 1900 and 1902, Picasso made three trips to Paris, finally settling there in 1904. He found the city's bohemian street life fascinating, and his pictures of people in dance halls and cafs show how he learned the postimpressionism of the French painter Paul Gauguin and the symbolist painters called the Nabis. The themes of the French painters Edgar Degas and Henri de Toulouse-Lautrec, as well as the style of the latter, exerted the strongest influence. Picasso's Blue Room (1901, Phillips Collection, Washington, D.C.) reflects the work of both these painters and, at the same time, shows his evolution toward the Blue Period, so called because various shades of blue dominated his work for the next few years. Expressing human misery, the paintings portray blind figures, beggars, alcoholics, and prostitutes, their somewhat elongated bodies reminiscent of works by the Spanish artist El Greco. Rose Period Shortly after settling in Paris in a shabby building known as the Bateau-Lavoir (laundry barge, which it resembled), Picasso met Fernande Olivier, the first of many companions to influence the theme, style, and mood of his work. With this happy relationship, Picasso changed his palette to pinks and reds; the years 1904 and 1905 are thus called the Rose Period. Many of his subjects were drawn from the circus, which he visited several times a week; one such painting is Family of Saltimbanques (1905, National Gallery, Washington, D.C.). In the figure of the harlequin, Picasso represented his alter ego, a practice he repeated in later works as well. Dating from his first decade in Paris are friendships with the poet Max Jacob, the writer Guillaume Apollinaire, the art dealers Ambroise Vollard and Daniel Henry Kahnweiler, and the American expatriate writers Gertrude Stein and her brother Leo, who were his first important patrons; Picasso did portraits of them all. Protocubism In the summer of 1906, during Picasso's stay in Gsol, Spain, his work entered a new phase, marked by the influence of Greek, Iberian, and African art. His celebrated portrait of Gertrude Stein (1905-1906, Metropolitan Museum of Art, New York City) reveals a masklike treatment of her face. The key work of this early period, however, is Les demoiselles d'Avignon (1907, Museum of Modern Art, New York City), so radical in styleits picture surface resembling fractured glassthat it was not even understood by contemporary avant-garde painters and critics. Destroyed were spatial depth and the ideal form of the female nude, which Picasso restructured into harsh, angular planes. CubismAnalytic and Synthetic Inspired by the volumetric treatment of form by the French postimpressionist artist Paul Czanne, Picasso and the French artist Georges Braque painted landscapes in 1908 in a style later described by a critic as being made of little cubes, thus leading to the term cubism. Some of their paintings are so similar that it is difficult to tell them apart. Working together between 1908 and 1911, they were concerned with breaking down and analyzing form, and together they developed the first phase of cubism, known as analytic cubism. Monochromatic color schemes were favored in their depictions of radically fragmented motifs, whose several sides were shown simultaneously. Picasso's favorite subjects were musical instruments, still-life objects, and his friends; one famous

Free Essays on Separatins Of Our Country

Separations of our Country These articles, to me, discuss the problems of slavery and war in the early 1860†s. Slavery and war were major issues in these days that caused many problems. After reading both the Gettysburg Address and the Letter to His Son that dealt with the feelings on our world years ago fro, Abraham Lincoln and Robert E. Lee, I feel that their point of views are both similar and yet much different, in dealing with these two topics. Abraham Lincoln, our American President at the time wrote The Gettysburg Address. The address helped people to realize what was happening to our country. Lincoln’s speech was very powerful, honorable, and sympathetic at the same time. Lincoln says, â€Å"It is for us the living, rather, to be dedicated here to the unfinished work which they who fought here have thus for so nobly advanced† (Adventures in Literature pg. 367). He spoke so simply but was still able to set his feelings on freedom across. Robert E. Lee on the other hand, wrote a Letter to His Son, which discussed his views on how he felt with this separation within are nation. Lee is concerned with freedom in the country as a whole but more in his home state of Virginia. For example at the end of his letter, he says â€Å"if the union is dissolved, and the government disrupted, I shall return to my native state and shine the miseries of my people, and save in defense, will draw my sword on none† (Adventures in Literature pg. 370). In my opinion, Lee’s letter was not as much concerned with the country as a whole. In conclusion The Gettysburg Address and the Letter to His Son are very much alike. In each article, both Lincoln and Lee are against this separation between union and confederation. They both are very concerned with the issue and are fighting for a change. I think that they both wrote what they did to express their feelings and to try and get the people of the country to come together and cha... Free Essays on Separatins Of Our Country Free Essays on Separatins Of Our Country Separations of our Country These articles, to me, discuss the problems of slavery and war in the early 1860†s. Slavery and war were major issues in these days that caused many problems. After reading both the Gettysburg Address and the Letter to His Son that dealt with the feelings on our world years ago fro, Abraham Lincoln and Robert E. Lee, I feel that their point of views are both similar and yet much different, in dealing with these two topics. Abraham Lincoln, our American President at the time wrote The Gettysburg Address. The address helped people to realize what was happening to our country. Lincoln’s speech was very powerful, honorable, and sympathetic at the same time. Lincoln says, â€Å"It is for us the living, rather, to be dedicated here to the unfinished work which they who fought here have thus for so nobly advanced† (Adventures in Literature pg. 367). He spoke so simply but was still able to set his feelings on freedom across. Robert E. Lee on the other hand, wrote a Letter to His Son, which discussed his views on how he felt with this separation within are nation. Lee is concerned with freedom in the country as a whole but more in his home state of Virginia. For example at the end of his letter, he says â€Å"if the union is dissolved, and the government disrupted, I shall return to my native state and shine the miseries of my people, and save in defense, will draw my sword on none† (Adventures in Literature pg. 370). In my opinion, Lee’s letter was not as much concerned with the country as a whole. In conclusion The Gettysburg Address and the Letter to His Son are very much alike. In each article, both Lincoln and Lee are against this separation between union and confederation. They both are very concerned with the issue and are fighting for a change. I think that they both wrote what they did to express their feelings and to try and get the people of the country to come together and cha...

Stationery, Cemetery, and Shepherd

Stationery, Cemetery, and Shepherd Stationery, Cemetery, and Shepherd Stationery, Cemetery, and Shepherd By Maeve Maddox Stationery Both stationery (n.), meaning writing paper, and stationary (adj.), meaning not moving, go back to the same source that gives us the noun station (a stopping place; a place where someone or something stands). In the Middle Ages a stationer was a tradesman who had a shop, as opposed to one who carried his stock around with him. Originally the word was used in a general sense to denote any shopkeeper, but came to be associated with booksellers in particular. Finally, stationer came to mean someone who sells writing materials, i.e., stationery. TIP: Stationery, like paper, is spelled with er. A parked car is stationary. Like park, the adjective stationary is spelled with ar. Cemetery This seems to be an especially endangered spelling. I have a local real estate map that spells cemetery incorrectly dozens of times. Ive even seen an official cemetery sign with the incorrect spelling. TIP: Knowing that cemetery comes into English from French cimetià ¨re may help writers recall the correct er spelling. German Shepherd Browse the pets for sale in any classified section and you will see the word for the dog spelled sheperd, shepard, and shephard. At least two of these misspellings for the dogs name are common spellings for family names. For the dog, however, the spelling is shepherd. TIP: The dog was originally bred to help in the herding of sheep or cattle. The word shepherd comes from sheepherd. A shepherd herds sheep. Think herd. Want to improve your English in five minutes a day? Get a subscription and start receiving our writing tips and exercises daily! Keep learning! Browse the Spelling category, check our popular posts, or choose a related post below:Good At, Good In, and Good With35 Genres and Other Varieties of FictionComma Before Too?

Business P6 UNIT 12 Essay Example | Topics and Well Written Essays - 250 words

Business P6 UNIT 12 - Essay Example These types of online marketing operate in a twenty-four-hour time frame, where the target client is, conveniently, placed to get the advertisement (Sheehan, 2010). Online marketing has potential benefits, both to the target client and the advertising company. One of the significant benefits is convenience, where a company is open for business on the world platform with little expenses. It is also convenient to clients in that a person can browse the online stores at any time, and place their orders at a convenient time. Online marketing is also, cost, effective than the usual physical retail. A business entity does not have to incur expenses felt on property rental on retail outlets. Internet marketing enables one to build a personal profile of the client, where client follow up is possible, and the cost is effective. There personalized offers to meet client needs, and invite them to make product reviews, hence retaining them as regular customers (Sheehan, 2010). Another major benefit is accessibility, especially to people who are disabled. Sheehan (2010) observes that physical barriers for accessing products do not exist anymore because the internet can be accessed from various electronic devices that are potable and convenient, even to the disabled. In addition, there are potential benefits to an online organization, making it easy to manage its operation. It is also cost effective, in that one does not have to incur rental property for operation. Furthermore, many businesses are opting to do marketing online, meaning that there is a huge potential for

Final Exam Paper Essay Example | Topics and Well Written Essays - 750 words

Final Exam Paper - Essay Example It also gives the impression of a performance within a performance, as he moves from frame to frame. The relationship between Alfredo and the boy Toto is the central theme of the film. The two actors act and react with each other, and the boy provokes the old man in various ways, so that he becomes cross at first, and impatient. Over time he mellows, however, and there are many camera shots of the two of them together, the boy in Alfredo’s lap, or on the handlebars of his bicycle, as if the little boy is in the shadow of his protective grandfather figure. At the time when Toto grows up and leaves his mentor, the old man has become weak, and the young man has become strong, reversing the relationship in a poignant way. Salvatore is first seen in the city behind the windscreen of his car, which puts his face in a wide angle frame. After that he goes to his bedroom and looks out through a window, which makes the frame tall and narrow. When the flashback to his village begins, it shows the dusty scene through the square opening of the bell tower, as if the eye of memory looks out from a small space into the wider world. The child Toto is shown clutching scraps of film in his hands through the frame of an internal window. The adolescent Salvatore looks up at Elena’s window with longing, and his first kiss takes place in the same small projection box in which he learned about love. The message here is that life comes through the window of the cinema screen, and this is made most clearly of all in the long scene where Salvatore watches the collage of screen kisses that Alfredo has left to him. This arouses Salvatore’s affective memory, reminding him of the impoverished childhood that he had, and the longing to grow up and escape from the constraints of his village to experience love and real life in the world beyond. Part Two The character of Rick in Casablanca is quite similar to the character of Alfredo, in some ways. He is portrayed as a somewh at distant and unfeeling person, hiding under his hat and smoking quietly so that no-one can guess what he is thinking. He is at home in the dark night club scenes, with shady characters and this is conveyed by the dim lighting of Rick’s cafe. The skill of the director is evident in the way that the audience is at first led to believe he is a bad character, always in the shadows but in the end the farewell scene shows that his gloom is because of sadness at the loss of his love, and he really is a noble character. Like Alfredo, Rick needs the presence of a completely different person to bring out his true nature. The female lead character is often shown in close-up and her acting is expressive. She reacts to Rick’s enigmatic silences with passionate looks, and provides the other side of the story that Rick is not telling anybody. There is a whole back story that only gradually is revealed. Ingrid Bergman has is open and sympathetic, where Humphrey Bogart is cynical and deceptive. Both films show how opposites attract, and enhance each other, but there is an element of nostalgia about them, since separation is the only way that they can live their lives. In both films kisses are the force that heals their pain. In Casablanca Rick and Ilsa’s bittersweet kiss is not a standard happy ending, because there are too many obstacles in the way for them to be together, especially Ilsa’s husband. In Cinema Paradiso the collage of kisses are like an intense reminder of all that is most

Daubert Standard Assignment Example | Topics and Well Written Essays - 500 words

Daubert Standard - Assignment Example From this essay it is clear that the Daubert standard states that the evidence should be reliable in nature; this means that the testimony provided by the expert witness should be obtained through a scientific method. According to the Supreme Court, an expert’s testimony is reliable if the scientific method used is testable, can be proved as false, and can be tested to be proved right or wrong. The testimony is even considered as reliable if it has been previously reviewed or is going to be reviewed in future by peers and it has an error rate attached to it already and the testimony or the finding should be acceptable by the community of science.This study outlines that  the crime scene investigators found two different sets of paints on the victims jeans, one paint was from the wall of the victim’s house and the second paint was from an unknown source. The forensic lab decided to figure out whether both the paints were from the same source or not. They developed a hy pothesis stating that both paints were from different sources and then they developed a null hypothesis stating that both the paints were from similar source.  The lab conducted various scientific tests to validate their hypothesis and prove that the paints were from different sources. The tests proved that the paints actually were from two different sources and the paints are not same. This test could have even proved the other way around that the paints were from the same source if other scientifically validity tests were used.

Mobile Collaboration Essay Example | Topics and Well Written Essays - 1500 words - 22

Mobile Collaboration - Essay Example   In the past years, the existing research focus is on the changing and evolving of wireless mobile computing technologies for human to machine and human to human collaborations. This collaborations has led to many IT leaders giving much attention to the extension of collaboration from desktop computers to mobile phones (Cisco, 2013). To increase the implementation of amalgamated communications, IDG Enterprise Survey indicate more than 67% of IT leaders are preparering to invest in the competences of communication. In other words, types of mobile collaborations have increased, ranging from helping children in reading to business to increase or better firm’s performance. Despite the advantages retrieved from mobile collaboration, there many challenges which are faced in the implementation stage. However, Cisco Mobile Collaboration Management Services offers solutions to such challenges especially to the IT leaders. According to Cisco (2013), if at all IT organizations would need to manage, secure and spread the collaboration knowledge on mobile devices as well as streamline mobile collaboration management, the best way is to adopt cloud-based mobile device and application. To streamline mobile collaboration management, the cloud-based mobile enables flexibility to scale, rapid deployment and increases support for new devices (Cisco, 2013). The model also offers hasty registration and WI-FI, Email, VPN for all company devices. Conversely, with the cloud model, IT organizations can alleviate security and acquiescence risks by locating and wiping out data for stolen or lost devices, and also enforces and administers passwords, encryption as well as loc k down security policies OTA. Nonetheless, in the education sector, mobile collaboration is also playing an important role.

Villa Building and Construction Essay Example | Topics and Well Written Essays - 8000 words

Villa Building and Construction - Essay Example The bungalow will be of plinth area of 6800 sq ft, accommodating 4 bedrooms, two in the ground floor of 21.5 ft x 23 ft and 19.5 ft x 20 ft dimensions and two in the first floor of 21 ft x 23 ft and 19.5 x 20 ft dimensions, all with bath, closets attached, Great Room - Living, Dining and Kitchen of 30 ft x 40 ft , with two stone fire places, cherry cabinets and big screen HDTV,two wet bars with sit outs annexed, and a basement area with provision for physical work out and indoor games. Project scope defines what the project is going to accomplish as related to its budget. Budget includes time and money. It covers project size, goals, and requirements. Should there arise a change in the scope, corresponding change in the budget becomes inevitable. For example, if the project scope is to construct the servant's quarters with a budget of $ 50,000, then the project manager is expected to do that. Just in case, the project manager is asked to change the specifications of the quarters, say, adding another room in the servant's quarters, then the project scope gets changed. The budget is also to be changed correspondingly. From these quotes, one can understand that Quality in any situation is meeting the user's expectation. ... In our project the following can be classified as cycled activities: 1. Think tank meetings, involving reviews and revisions 2. Building construction work, at different stages. 1.04 Typical non-cycled activities Typical non cycled activities in our project are 1. Buying of land for construction of villa 2. Buying of furnishings at the final stage. Complete the following questions: 1.05 Describe the following broad project objectives: Scope. Project scope defines what the project is going to accomplish as related to its budget. Budget includes time and money. It covers project size, goals, and requirements. Should there arise a change in the scope, corresponding change in the budget becomes inevitable. For example, if the project scope is to construct the servant's quarters with a budget of $ 50,000, then the project manager is expected to do that. Just in case, the project manager is asked to change the specifications of the quarters, say, adding another room in the servant's quarters, then the project scope gets changed. The budget is also to be changed correspondingly. Scope of this project is to build a Villa of 6800 sq ft plinth area, on a budgeted cost of $ 3,000,000 to be completed in 17 months. Quality "Quality is fitness for use" - J.M. Juran "Quality is meeting or exceeding customer expectations at a cost that represents a value to them." - H. James Harrington "Quality should be defined as surpassing customer needs and expectations throughout the life of the product." - Howard Gitlow and Shelley Gitlow [Neville Turbit, (Sept 2004) 08-03-2009()] From these quotes, one can understand that Quality in any situation is meeting the user's expectation. If one

Mobile Collaboration Essay Example | Topics and Well Written Essays - 1500 words - 22

Mobile Collaboration - Essay Example   In the past years, the existing research focus is on the changing and evolving of wireless mobile computing technologies for human to machine and human to human collaborations. This collaborations has led to many IT leaders giving much attention to the extension of collaboration from desktop computers to mobile phones (Cisco, 2013). To increase the implementation of amalgamated communications, IDG Enterprise Survey indicate more than 67% of IT leaders are preparering to invest in the competences of communication. In other words, types of mobile collaborations have increased, ranging from helping children in reading to business to increase or better firm’s performance. Despite the advantages retrieved from mobile collaboration, there many challenges which are faced in the implementation stage. However, Cisco Mobile Collaboration Management Services offers solutions to such challenges especially to the IT leaders. According to Cisco (2013), if at all IT organizations would need to manage, secure and spread the collaboration knowledge on mobile devices as well as streamline mobile collaboration management, the best way is to adopt cloud-based mobile device and application. To streamline mobile collaboration management, the cloud-based mobile enables flexibility to scale, rapid deployment and increases support for new devices (Cisco, 2013). The model also offers hasty registration and WI-FI, Email, VPN for all company devices. Conversely, with the cloud model, IT organizations can alleviate security and acquiescence risks by locating and wiping out data for stolen or lost devices, and also enforces and administers passwords, encryption as well as loc k down security policies OTA. Nonetheless, in the education sector, mobile collaboration is also playing an important role.

Personal development plan Statement Example | Topics and Well Written Essays - 750 words

Development plan - Personal Statement Example Having been into Loughborough expanded my interests and knowledge better. I came to realize that Business Management requires me to be well-rounded. Having numerical skills is an advantage, but there are other traits required of me such as a good market sense, excellent inter personal skills, people skills and management. Along the way, I felt the drive to improve in each area. Most of my subjects became the driving force for me to be always one step ahead of my curriculum. I also took pains in improving my communication skills and became involved in activities that helped me become a good speaker and enabled me to improve my public relations skills. My one year internship in PricewaterhouseCoopers, Hong Kong, gave me the opportunity to put my skills and knowledge into practice, as I became involved in customer management while I assisted in providing accounting and business advice to clients. Being in the workplace challenged me not to make mistakes. Accuracy is one of the goals I h ad to achieve, being in a situation that allowed me to influence the clients’ business decisions. For one year, I was able to see Business Management on a personal note, seeing firsthand the challenges that businessmen face. Figures, when transformed into useful data, can make or break a business. From then, I had a much clearer vision of what I want to do after pursuing my bachelor’s degree in Business Management. I see myself employed in a Multi National company, rising from the ranks in the span of ten years, most probably specializing in Marketing and Financial Management. My short-term goal includes immediately getting into a post graduate degree in Business Management after my graduation. Pursuing higher studies will translate into obtaining better qualifications so I can land a good job in any of my dream companies. A Masters Degree will also enhance my skills, provide me more opportunities to hone academic skills and hopefully, apply them in a real business set ting. I plan to do this by getting an entry level job in the middle of pursuing my Masters Degree. I firmly believe that one can only fully understand the concepts learned in school by putting them into practical use. Having a real job will allow me to do this. To succeed in post graduate school will prove to be a challenging feat to me, but I see no reason why I would fail. Academically speaking, I have sufficient knowledge and experience for me to understand the ropes of this course. My quantitative skills and immense interest in Business will definitely get me across my goals. I also recognize my personal skills that would help me get through graduate school. I am a results oriented person who always has a set of goals, short term and long term, to accomplish. I set my own pace basing on the goals that I have set. I am motivated, self driven, who always strive for excellence in the things I do. I am highly inquisitive, always wanting to go deeper into my interests. Moreover, I co nsider myself to have above average leadership skills. I have the ability to encourage a group of people towards achieving goals. Further to this, I have special interest in the culture and the arts, which was brought forth by the fact that I have travelled in various countries and immersed into difference cultures. I can adapt well in any

Katzenbach and Smith Essay Example for Free

Katzenbach and Smith Essay Introduction For this essay I will be explaining what I might do to encourage team performance by using Katzenbach and Smith’s Article as a scaled directive/guideline. The discipline of teams has been useful to show how to encourage team performance and this I will explain I will explain in the first part of this essay. Main Body According to Katzenbach and Smith, there is an importance to distinguish between Teams and Groups. Why? Because it is believed that Teams are different from Groups because they use collective working whereas Groups are based around individual performance. 8 things that Katzenbach and Smith said about how to encourage Teamwork are: ‘Establish urgency, demanding performance standards, and direction’. Katzenbach and Smith: ‘All team members need to believe the team has urgent and worthwhile purposes, and want to know what the expectations are.’ I can use this to encourage team performance by setting standards, rules and directions so the team will know their purpose and what goals they are aiming for. ‘Select members for skill and skill potential, not personality’. Katzenbach and Smith: ‘No team succeeds without the skills needed to meet its purpose and performance goals. Yet most teams figure out the skills they will need after they are formed.’ You can choose the people to be team leaders, purely based on their skills. This people will need to have good skills most especially the ‘Leadership skills and Motivational Skills’ in order to take charge of the team in absence of the manager. ‘Set some clear rules of behaviour’. Katzenbach and Smith: ‘All effective teams develop rules of conduct at the outset to help them achieve their purpose and performance goals.’ To encourage team performance I would make sure I have the team’s attention with no distractions from phones etc., make sure everyone gets a clear chance to speak with no interruptions and constructive confrontation, agree that the only things to leave the room is what is agreed on, always make sure that everyone has an analytic approach while doing research and last of all make sure everyone gets assignments to themselves and make sure they are done. ‘Challenge the group regularly with fresh facts and information.’ Katzenbach and Smith: ‘New information causes a team to redefine and enrich it’s understanding of the performance challenge, thereby helping the shape a common purpose, set clearer goals and improve its common approach.’ I can use this to encourage teamwork by always making sure that everyone on the team does research to see defects in the way the team works, and then have sessions where we discuss how this defects can be sorted out. ‘Spend lots of time together.’ Katzenbach and Smith: ‘Common sense tells us that team members must spend a lot of time together, scheduled and unscheduled, especially in the beginning.’ This can be used to encourage teamwork as it will create creative insights and personal bonds between the team members as they will slowly star to develop a work relationship between each other. ‘Exploit the positive feedback, recognition, and reward.’ Katzenbach and Smith: ‘Positive reinforcement works as well in a team context as elsewhere. This will help encourage team performance as it allows people in the team to get a sense that yes they are being shown gratitude for all the hard they’ve show. One other way you can encourage team work it to use ‘Emotional Intelligence’ (Goleman) this is needed to improve a team as it brings concepts of love and spirituality: bringing compassion and humanity to work and ‘Multiple Intelligence’ theory which illustrates and measures capabilities people possess, and also help show that everybody has a value in the team. But Teams may also have many risks attached and in this part of essay I will be analysing these risks. For example ‘Conformity’, this is the action of always acting in accordance to prevailing social standards, attitude, and practices etc. An example of this type of behaviour can be seen in Solomon Asch’s ‘Studies in Conformity’ – in one of Asch’s experiment which was design to show how perfect normal human beings can be pressured into unusual behaviour by authority figures, or by the consensus of opinion around them. The experiment was. Eight subjects were seated round a table to prevent suspicion. Only one participant was actually a genuine subject while the others were just actors to give already selected responses. The experiment was each participant was in turn asked to answer a series of question, such as which line was the longest or which matched the reference line. The results came out as ‘over one third of the subjects also voiced an incorrect option.’ Asch’s experiment gives us a slight insight into how conformity affects a team. Another risk team work is ‘Groupthink’. Groupthink is when groups of people in a team harmonise in a decision making group override a realistic alternative as it differs from their group’s alternative. An example of group think can be seen ‘Group Decision Fiascos Continue: Space Shuttle Challenger and Revised Groupthink Framework’. The explosion of the space shuttle Challenger is the worst disaster in space flight history and it crippled the American space programme. The NASA managers knew about the faults if they launched the space craft, but despite a huge amount of warnings from their engineers about the dangers if launching posed by the low temperatures that morning. The NASA managers also failed to adequately repost the problems to their superiors and this was what actually caused the catastrophic disaster. And this is why groupthink is a risk of Teamwork. As people can be shut out and made to look as it they didn’t know what they were talking about or being made to look as if they were outcasts. Conclusion But all in all we have to give credit to Katzenbach and Smith for their work in finding ways in improving team work as they have given us a great insight in to improving performance in a team by setting showing how and what it takes to make a team function properly. But as highlighted teams can be risky as they can cause ‘conformity’, and sticky situations like ‘groupthink’ which cause cost lives and not on lives, in a business environment it could cost sales to drop etc. Teamwork has lots of risks but if team work is carried out properly then it is most like nothing will go wrong for the people in the team.

A Review Of Controlled Release Fertilizers Biology Essay

A Review Of Controlled Release Fertilizers Biology Essay In general, plants must be supplied with nutrients during the whole vegetation period. In horticulture this is achieved by applying quickly soluble fertilizer once to twice a week, for example. This kind of fertilizer application is very labour-intensive and requires considerable specialist knowledge, so as to select the correct rate of application, appropriate time of application and correct composition for the particular plants to ensure optimum plant production. With the use of slow or controlled release fertilizers the full amount of nutrients necessary for the whole vegetation period can be applied at the time of planting or at the earliest stages of plant growth, in the form of a nutrient pool Also, about half of the applied fertilizers, depending on the method of application and soil condition, is lost to the environment, which results in the contamination of water [1].This kind of environmental concerns of feeding crops with traditional fertilizers has led to developing Slow Release Fertilizers (SRFs) or Controlled Release Fertilizers (CRFs). SRFs or CRFs are easy and safe to use. They reduce risk of incorrect fertilizer application; they are labour saving; and minimize nutrient losses by leaching or fixation. The idea of producing SRFs was developed from 1963 by encapsulation of fertilizers by waxes. After that, these products have been commercialized. There are lots of SRF and CRF brands; market leader in controlled release fertilizers is Scotts Professional with key brands such as Osmocote Exact, Sierrablen and Osmoform. SunGro Company is also producing controlled release fertilizers with brand name of Multicoate. AGLUKON is also another commercialized SRF product [2-4]. Like lots of scientific fields, agriculture industry has been over shadowed by nanotechnology. Applications of nanotechnology in agriculture includes agriculture crop improvement, nanobiotechnology analysis of gene expression and regulation soil management, plant disease diagnostics, efficient pesticides and fertilizers, water management, bioprocessing, post harvest technology, monitoring the identity and quality of agricultural produce and precision agriculture[5]. Efficient pesticides and fertilizers in terms of Nano-composite based slow release fertilizers are developing in current decades. Using nanoparticles as reinforcing or cementing agent of polymer coatings has been the only feature of nano particles which is used in preparing slow release fertilizers [6,7]. Fertilizers Fertilizers are applied to soil to promote plant growth. They contain some beneficial nutrients including macronutrients and micronutrients. Macronutrients are nitrogen, phosphorus, and potassium which are added to soil in quantities from0.2% to 4.0% (on a dry matter weight basis) and are more essential than micronutrients. Micronutrients are elements which are applied to soil in much smaller amounts, ranging from 5 to 200 ppm, or less than 0.02% dry weigh. These elements could be sulfur (S), boron (B), copper (Cu), iron (Fe), manganese (Mn), molybdenum (Mo), zinc (Zn)[8,9]. 2.2. Types of fertilizers Fertilizers would be categorized from source of being and also from release properties points of view. All fertilizers could be organic or synthetic from source of being point of view. Organic fertilizers are naturally occurred including seaweed, worm casting, manure, slurry, peat, humic acid, guano and brassin. They provide slow release of nutrient as they need soils bacteria to be broken down to needed elements. Also, they may improve the biodiversity of soil by supplying organic matters and micronutrients for organisms. Organic fertilizers are cheaper and safer than synthetic fertilizers [9,10]. The main synthetic or mineral fertilizers are urea, ammonium sulphate, ammonium phosphate, phosphate rock, potassium chloride, super phosphates, calcium ammonium nitrate, potassium sulphate and NPK, PK and PK compound fertilizers. The most important drawbacks of synthetic fertilizer is their long term sustainability. Also, they are more expensive in contrast to organic fertilizers [10]. Also, fertilizers can be categorized into ordinary and controlled release fertilizers from release properties points of view. Drawbacks of non- controlled release fertilizers Ordinary fertilizers leach to soil very quickly and most of them are not used by the plants. According to figures about 40-70% of nitrogen, 80-90% of phosphorous, and 50-70% of the applied normal fertilizer is lost to environment and cannot be used by plants[11]. This rapid leaching will cause burning of plants and growing in spurts. Also, the lost elements will make some serious problems for our environment. Eutrophication, Blue baby syndrome, soil acidification, persistent organic pollutants, heavy metal accumulation, atmospheric effects are environmental concerns of ordinary fertilizers. Another result of quick leaching of fertilizer is repeating the application of fertilizers which will increase the costs[8,12,13]. Slow or controlled release fertilizers Slow release fertilizers or controlled release fertilizers are coated in a substance that enables a slow release time and eliminates need for constant fertilization and higher efficiency rate than soluble fertilizers [14]. The interest in these materials is for one or more of the following reasons: Availability of nutrients during the hole growing-season; reduced nutrient loss via leaching and run-off; reduced cost and labor outlay in crop production; reduced chemical and biological immobilization reactions in soil which cause plant unavailable forms; reduction of rapid nitrification and nitrogen loss through ammonia volatilization and denitrification; reduced seed or damage from high local concentrations of salts; reduced leaf burn from heavy rates of surface-applied fertilizers; better seasonal distribution of growth and better acclimatization in home or display environment; improved storage and handling of fertilizer materials[15]. Differences between slow and controlled release fertilizers Although there is no a special difference in general function of CRF and SRF, but it should be mentioned that they are manufactured by different materials and techniques with different properties. In slow release fertilizers elements are present in the fertilizers in a chemical form, which is not available to plants and they will be converted by physiochemical effects or microorganisms activities into nutrient forms in the soil. But in controlled release fertilizers elements are packed in coated granules and are released through the coating over a certain period of time. Also, in SRFs nutrients available period is affected by a lot of factors such as water content of soil, Ph, temperature, microorganisms activity, aeration. However, the longevity of CRF depends on coating thickness and temperature of soil. Only coating method is effective in changing pattern of nutrients release and a fixed coating thickness control nutrients release. In CRFs declared release time refers to soil temp erature of 20-21 oC. Higher temperatures accelerate the element release and lower temperatures make it longer [4,16]. SRFs are chemically prepared slow released. Some kinds of SRFs are Urea Aldehydes (UA) and Chelated Micronutrients(CM). Common type of UAs is urea formaldehyde which is high nitrogen fertilizer. Starting release rate of UAs is high but it dies off slowly for 3 years. This kind of fertilizer depends on microorganisms to break it down for plant use. CMs are substances that hold firmly together iron, manganese, zinc, and copper. They slowly releases over a long period of time [17]. 2.4.2. Types of CRFs 2.4.2.1. Sulfur Coated (SC) Elemental sulfur when is oxidized to its sulfate form would be one of the nutrients which is essential for some plants and is normally blended with other fertilizers. Using sulfur coating is also another way to provide sulfur simultaneously with making slow release properties for a core granular fertilizer. As the sulfur containing materials like polysulfides or lingosulfonate are brittle and also give a low wetting of defects they are normally mixed with waxes or plasticizers. Many formulas are available for SCs. Their release time is generally 3-4 months. SDs are released by microorganisms [18-22] 2.4.2.2. Wax coated (WC) One of the methods of reducing fertilizer release rate is dispersing granular fertilizers with molten wax and then cooling the mixture below the melting point of the wax [23]. Paraffin is one of the most used wax as a coating for fertilizers. Paraffin  wax   is a white, tasteless, odorless, waxy solid, with a typical melting point between about 47  °C and 64  °[24]. Other types of waxes are synthetic oil based, petroleum or mineral waxes. Waxes are normally used by an additive or a tackifiere agent to make a good sealing properties [25,26] 2.4.2.3. Polymer Coated (PC) Polymer-coated fertilizers (PCF) represent the most technically advanced controlled released fertilizers. They include a water-soluble fertilizer core and one or more than one layers of polymer. There are large varieties of polymers to coat the core fertilizer also the coatings layer could be the same one or different. In PC fertilizers release of nutrients will happen by diffusion through a semi permeable polymer membrane. Water penetrates the coating and dissolves the core. Release rate can be controlled by varying the composition and thickness of the coating. In addition, pressure builds up can cause cracks to form, from which fertilizer passes into the soil [27, 28]. 2.5. Review of preparation methods of different polymer coated CRFs 2.5.1. Sole Polymer coated One type of polymer coated CRFs is the one which the fertilizer core which could be N, P, K OR NPK compound, is just coated with one or more than one layer of polymer coating. In this case the polymer could be solvent based or water-based. The application process starts with dissolving the polymer in a organic solvent or water. After dissolving the coating will be sprayed onto the fertilizer in a coating drum or fluid bed [29]. Benefits of polymer coated CRFs are as follow; uniform and defect free coating will surround fertilizer; the coating will be very tough and durable which is resistant against mechanical breakdown; they are biologically inactive so they will not breakdown by soil microbes. In most cases except for degradable polymers release of fertilizers will be happen by diffusion through polymer coat rather than through defects. In some other coated fertilizers like sulfur coatings there should be a flaw in coating to make release of fertilizer. There are lots of examples for polymers which have been used in literatures as coating for fertilizers, some of them are as follow; dicyclopentadien[30],Urea and urethane based [31-36], epoxy based [ 37-39], polyvinylidene chloride-based latex[29] carboxyl-carrying ethylene polymers[40], biodegradable starch based[41], urea formaldehyde[42]. However, polymer coated fertilizers have some week points. About solvent-based coatings using large amount of organic solvents like toluene or xylene will lead to environmental concerns. These solvents are volatile and releasing them to environment makes some hazards for human health. Also, polymer coatings are more expensive than sulfur coatings; the process and equipments are also more complex than equipments used for other coatings. 2.5.2. Sulfur-polymer coated One of most common coated fertilizers are the ones in which core fertilizer is covered by a layer of sulfur coating and a layer of polymer. The polymer layer can be primer or outer layer; means that sulfur layer in some researches has been the first layer and in some others the outer layer. Sulfur Using coating is a suggested method to remove drawbacks of sulfur coated CRFs. One of these drawbacks is very fast release of fertilizer in first few days after application. The other one is brittleness of sulfur coatings which may lead to some fractures during handling or storage and losing the fertilizer into soil. Another problem is that sulfur coatings have a high surface tension with water and cannot provide enough wetting for a good diffusion [19, 29, 38, 21]. The most common method for applying the sulfur coating is spray. Molten sulfur compound will be sprayed over a pre-polymer coated fertilizer granule [38,43]. 2.5.3. Wax-polymer coated There are lots of researches focusing on making controlled release fertilizers using Wax-polymer coatings. Wax layer has three major benefits; one is that they are applied over the polymer layer for decreasing the fracture probability of coating and the other one is for decreasing the amount of polymer and avoiding consuming more polymers to make the process cost effective. Also, they can eliminate imperfection of granules surface to make a good surface coating. Most common waxes which have been used in state of the art is C30 alpha-olefin and paraffin. Other petroleum products like lubricants and bitumen or natural products like canola oil, soybean oil, coconut oil and palm oil, also have been used. After melting the wax it will be applied by mixing with polymer coated fertilizer. Normally the polymer is thermoset to avoid any damages of polymer by the wax in its melting point. The wax normally should have drop melting point from 50 to 120 °C. Wax is normally about 0.2% to 10 % by weight of fertilizer [25, 38, 44, 45]. 2.5.4. Filler- polymer coated As mentioned before, despite lots of advantages of polymer coating to make slow release properties when such polymers are used as a sole coating material the ultimate product would be expensive as you have to consume large amount of polymer. Using mineral or organic fillers is one way to avoid using large amount of polymer. Also, in some researches fillers play the role of detackifier, to prevent adherence of coated granules to each other, and strengthening agent [46]. Fillers may be used either as a mixture with polymer to make a nano-composite polymer [47] or as a separate layer. The most common method is second one in which the filler will be added and mixed with polymer coated granules before drying the granules. Most common used fillers are some very fine(less than 20 microns) inert inorganic materials like clay, diatomaceous earth, bentonite, kaolin, gypsum powdered limestone, talc, barium sulfate. Some other fillers like waste cellulosic materials also have used as filler in combination with polymer.[47-51] 2.6. Techniques coating application According to studies have been done; encapsulation methods of fertilizers can be divided into three methods including in-situ, spray and mixing. 2.6.1. In situ This method includes formation of fluid dispersion of the soluble fertilizer in a solvent and mixing the prepared solution with monomers of a polymer. Polymerization will happen and depend on the method; granules or particles of fertilizers will form. Ni et al [52] have developed a double-coated urea fertilizer. For preparation of poly (N-vinyl-pyrrolidone) hydrogels containing urea (PCU), the monomer and a solution of urea in N-vinyl-pyrrolidone were mixed together. The polymerization was carried out at 65à ¢- ¦C for 3 h. The resulting samples were vacuum-dried, milled, screened and stored. After that first coating was dried sample and some amounts of urea were mixed with sodium alginate (SA) solution. Mixed solution was then added drop wise into 5% (w/w) CaCl2 aqueous solution and stirred constantly. The drops immediately turned into granules (about 4mm in diameter) because the SA in the drop was crosslinked by Ca2+ at once. The granules were filtered and dried in oven at 70à ¢- ¦ C. Then the granules were added to ethylcellulose ethanol solution. Multiple EC coatings were prepared by immersion of the previously coated granules into the Ethylcellulose (EC) solution repeatedly. Thus, EC-coated urea granules with different coating thickness were obtained. Hanafi et al [53], have coated a compound fertilizer by polyvinyl chloride (PVC), polyacrylamide (PA), natural rubber (NR), and polylactic acid (PLA) using in situ method. For encapsulation of compound fertilizer with polyacrylamide the granules were added to the solution mixture of monomers. Then the polymerization reaction will start in existence of fertilizers. The thickness of the coating layer on the compound fertilizer granules, determined by SEM, gave PVC compound coated fertilizer the highest value of 3.04 lm, and the lowest was obtained by PA (2.04  µm). Variation in the characteristics of the polymers would be utilized in producing CR compound fertilizer that fit the requirements of growing plants. Hudson et al [38] used epoxy to coat the fertilizer. In this research the urea granules were charged to a pan and warmed to 95 °C. Then the hydrogenated tallaw amine, 2-amino ethyl peperazine and bisphenol A diglycidyl ether were mixed and were added to the granules; meanwhile polymerization happened and prepared mixture was agitated till the fertilizer granules dried. 2.6.2. Spray method This method is most common method for coating the fertilizer granules in state of the art[. Usually, the solution of polymer in a suitable solvent is sprayed on the granule of fertilizer and then the granules are dried to remove the solvent through evaporation. The treatment is repeated as often as necessary until the desired coating percentage is reached. Lan et al [54] have used Chitosan and poly(acrylic acid-co-acrylamide) as biodegradable polymers to coat the NPK fertilizer. The NPK was compound fertilizer granules with about 2 mm in diameter. It was placed in a rotary drum and then the Chitson powder which was dissolved in epoxy-aceton solution was sprayed over the fertilizer. After drying the coating , Chitson coated granules were added to a flask equipped with a mechanical mixer. Carbon tetracholoride, polyethylene glycoloctyl phenyl ether, sorbite anhydride monostearic acid ester, solution of acrylic acid acrylamide , N,N- methylenebisacrylamide and ammonium persulfate was slowly added to the flask. After mixing the coated granules were dried in oven. This product with good controlled-release and water-retention capacity, being degradable in soil and environment-friendly, could be especially useful in agricultural and horticultural applications. Tomaszewska et al [55] have used spray technique for encapsulation of fertilizers. In order to improve the properties of coatings, the granules of previously coated fertilizer (wet method) were sprayed with a polymer solution or pure solvent (N,N dimethylformamide). Concentration of the polymer in solutions used for spraying was in the range of 13-17 wt%. Measurements of thickness, porosity of prepared coatings and microphotographic observation of the coatings were taken. Ma et al [56] have developed a method for encapsulation of fertilizer with a self assembled coating. The fertilizer granules were heated in a rotary drum to 75 °C for 10 minutes. Then the self assembling amphiphilic molecules (N,N-bisaminoethyl eleostearate) were sprayed over the fertilizer. After 20 minutes aliphatic isocyanates were sprayed over fertilizer. This process was repeated once again. The fertilizer kept for drying in the 75 °C for 20 minutes. Dai et al [57], have developed a controlled release fertilizer using a water soluble resin as a coating. The granular compound fertilizer was coated in fluidized bed. Lan et al [58], prepared a double-coated slow-release NPK compound fertilizer with superabsorbent and water-retention properties (DSFSW), whose inner coating was chitosan (CTS), and the outer coating was crosslinked poly(acrylic acid)/diatomite-containing urea (PAADU). This prepared product not only has slow-release property but also could absorb a large amount of water and preserve the soil moisture at the same time. In addition, the outer coating (PAADU) could protect the inner coating (CTS) from mechanical damage. These were significant advantages over the normal slow release or controlled-release fertilizers, which generally have only a slow-release property. The results indicated that the DSFSW could be found an application in agriculture and horticulture, especially in drought-prone regions where the availability of water is insufficient. At first the outer coating containing urea diatomite (PAADU) was prepared. The NPK compound fertilizer granule was placed into a rotary drum, and the Chitosan powder was stuck on the granules by means of epoxy dissolved in acetone. The adhesive was applied by spraying at regular time intervals. The process was finished until compact and homogeneous coating formed on fertilizer granule. The coated granules were dried to a constant mass at room temperature for 6 h. Then the CTS-coated NPK compound fertilizer granules were obtained. CTS-coated NPK compound fertilizer granules were dipped in water and then were immediately placed on PAADU powder and shaken. In this manner, PAADU could adhere to the surface of CTS-coated NPK compound fertilizer and form the outer coating. The surface of the product was crosslinked by spraying methanol solution of epoxy chloropropane and then dried in a 70  °C oven to obtain the final product, i.e., the double-coated slow-release NPK compound fertilizer with superabsorbent and water-retention. Hansen et al [36], encapsulate the granular fertilizer with the epoxy resin using spray method. In this research not coated fertilizer was placed in a rotating drum and pre heated to 250 ° F. A rapid drying solution of copolymers dicyclopentadiene and a modified vegetable oil were applied over fertilizer using spray in a thin stream of resin. Simultaneously hot air was passed through drum. Next monomers of second resin including a mixture of epoxidized soybean oil and polyester curing agent were applied over prepared granules. The solvent was a mixture of xylol and Cellosolve acetate. Hansen et al [39] also have used the above mentioned method for encapsulation of fertilizer with polyurethane. First of all the preheated fertilizer was coated by a synthetic drying oil. After drying the coating for a few minutes fertilizer were dusted by clay. Then Urethane solution in xylene and Cellosolve acetate were applied using spray. 2.6.3.Simple mixing In this method granules are simply mixed with the coating at its melting point or with a solution of polymer in a suitable solvent. Tomaszewska et al [59] used this method for coating the granular NPK fertilizer with polysulfone (PSF), cellulose acetate (CA) and polyacrylonitrile (PAN). The coating solutions were prepared by the dissolution of the solid polymer in adequate solvent. The NPK fertilizer was successively added to adequate polymer solution, and was covered by a thin layer of the solution. Subsequently, granules were dropped into water, where the gelation process takes place. The coated granules were removed from the precipitation bath and then dried to a constant mass. The multiple coatings were prepared by immersion of the single coated fertilizer into adequate polymer solution, then into water and drying. Hon [47] has prepared the coated granules by mixing method. After melting the thermoplastic polymer by heating, the cellulosic additive has been added to melt resin. Then after allowing the temperature to drop, for avoiding the fertilizer damage, the granules or powder fertilizer has been mixed with the prepared mixture using a Brabender Mixer. Markusch et al[60] just has mixed the fertilizer pellets with at first, a diluted polyol and then with a diluted isocyantae to make a polyurethane coating. Then the feretilizer were placed in oven for drying. 2.7. Special equipment for application of polymer coating Typical physical method for encapsulating fertilizers are spray coating, spray drying, pan coating, rotary disk atomization. Special equipments for these methods are rotary drum, pan or ribbon or paddle mixer, fluidized. Fluidized bed and rotary drums are the most important equipments [87, 88] Polymers used as coating for CRFs A broad range of polymers has been used in fertilizer coating. These polymers could be thermoset, thermoplastic or biodegradable. Some of common thermoset polymers are urethane resin, epoxy resin, alkyd resin, unsaturated polyester resin, phenol resin, urea resin, melamine resin, phenol resin, silicon resin. Among them, urethane resin urethane is very common used.[36,61] Thermoplastic resins are not very common used in art because of some problems. As mentioned before a very preferable method of applying polymers is spraying the dissolved polymer over granules. Either some of thermoplastic resins are not soluble in a solvent or make a very viscose solution which is not suitable for spraying. Polyolefine is used in art for coating the fertilizer granules [47,62]. Biopolymers, dispose in bioactive environments, degrade by the enzymatic action of microorganisms such as bacteria, fungi, and algae and their polymer chains may also be broken down by non enzymatic processes such as chemical hydrolysis. Non-biodegradable polymers are not environmental friendly. Due to environmental concerns there are some trends of replacing non-bio with bio degradable polymers as coating material from 1970s. But it should be mentioned that they are expensive yet and not very cost effective. Also, in production process durability of polymer should be adjusted with release time of fertilizer. Among natural and synthetic biopolymers starch and cellulose based polymers, chitosan (a linear  polysaccharide),poly lactic acid and poly(ÃŽÂ µ-caprolactone) due to low cost and abundance are some of used biopolymers in fertilizer industry[41,52,58,63-69] 2.5. Coating thickness Generally, polymer coatings are applied in a thickness which is suitable to make a desired controlled release property. Thickness could be related to characteristic of polymer and also it depends on existed porosity of polymer surface. If water vapor transmission rate of coating material is 0.01 to 20, coating thickness would be 1 to 100 microns. Preferred coating thickness is 1 to 50 microns. Coating process could be repeated more than one layer to get desired nutrient release [49]. 2.6. Investigation of release behavior of CRFs Release mechanism for different coatings is different. Thick encapsulated granules like sulfur coating will allow the nutrient to release when a flaw or rupture appears on the coating surface. In this case, rupture will happen because of permeation of water into coating and inside osmotic pressure. Also, biodegradable polymers will release nutrients while destroying by soil microbes activity. Polymer coatings or combination of different coatings will happen by diffusion of water through walls porosities. In this case release rate of can be controlled by the particle size of coated granules, thickness of coating and permeability of coating surface. Also, altering the chemical composition of fertilizer core and the coating will change permeability of coating; means that even basic or acidic environment will change the permeability. In some researches when the coating has been starch-vinyl, increasing size of encapsulated granules has led to slowing down the nutrient release [70, 71]. There are some standard test methods for measurement of controlled release properties. According To European standard the standard release time of N during 24 h should be 15% of total core nutrient. Also, release rate for 15 day should be 75% of total nutrients. Also American and Japanese standards say that the initial release shouldnt be more than 40% of total nutrient. According to European standards for measuring the release rate encapsulated fertilizer should be immersed in pure water at 25  °C (room temperature) in incubated state [72, 73]. For example Detrick et all[43] have investigated the release behavior of their product by immersion of 20 g of encapsulated granules for 8 h in water. After filtration of solid they dried the solid. Evaporation of water was done at 100  °C for 8 hours. Also, Ma et all [31] placed 14 g of granules in wire mesh holder into a jar with 300 ml water at 23  °C and agitated ir by an orbital shaker. Then, the adequate water was taken for elemental analysis.. Locquenghien et al [40] for investigation the slow release effect of fertilizer some amounts of fertilizer were continuously extracted with water. For this purpose the granules were arranged in layer in a cylindrical vessel field with water. Water was passed through this layer and its Nitrogen content was analyzed. 2.8. Commercial CRFs in world and Malaysia Urea-formaldehydes are oldest slow release products which were produced in 1936 and then were commercialized in 1970s. These products were known as Ureaform, Bluchip, Nitroform Methex and Nutralene. After that Tennessee Valley introduced sulfur coated urea technology in1960s.Polymer coated fertilizers were produced as early as 1970 in Japan. Most important commercialized polymer coated CRFs are Osmocote, Nutricote [74] Osmocote CRFs are NPK granules coated by a thermoset copolymer of dicyclopentadiene and a glycerol ester (linseed oil) dissolved in an aliphatic hydrocarbon solvent. The Osmocote CRFs are normally used for ornamental horticulture production like greenhouses, nurseries , citrus , and strawberry production[75]. Nutricote prills are encapsulated by thermoplastic resins likeas polyolefins, polyvinylidene chloride. The process of Nuricote involves dissolving polymer in fast-drying chlorinated hydrocarbon solvents and then applying the solution to a variety of nutrient substrates including urea, potassium sulfate, diammonium phosphate, ammonium nitrate and potassium chloride. Blendin the polymer with talc and ethylene-vinyl acetate has been done to obtain desired release rate[76] Sierra, Lesco and polyon are some other commercialaized CRFs in the world. In Malaysia two brands named Greenfeed[77] and KAMILA[78] has developed slow release fertilizer. Greenfeed contains Zeolite which helps to release nutrients when it is in contact with soil. KAMILA is specially formulated for oil plantation industry. 2.9. Tracing nano-technology features in fertilizer industry Reviewing literature shows that researches which have used nano-technology features in fertilizer industry are very rare. The main benefits of nanoparticles in these researches are using them as reservoir of fertilizer or as filler [79,80]. Solid nano-particles, have large surface areas and their reactivity is much more greater than that of micrometer size materials. Also, their surfaces and interfaces provide an active substrate for physical, chemical, and biological reactions [80]. Two published researches have done using nano-particles. One has used nano-clay as carrier of metal-urea complex; urea intercalated clay without any coating has been developed as slow release fertilizer[79]. In other one, a nanocomposite of nano particle, fertilizer and polymer has been granulated and developed as slow release fertilizer. The production method involves mixing monomers, adding nano particle, which could be nano clay, nano bentonite, nano kaolin, polymerization and then granulating the mixture. In this research nano particle just work as good and effective filler [81]. Making polymer-nano-particle composites is something common in industries. Lots of researches have been done in this area, but researches around using nano-particle as reservoir for fertilizer have been done rarely. For more study here, we will review the researches have been done. 2.9.1. Interc

Gay, Lesbian and Bisexual Issues - The Struggle of Sexual Minorities Es

The Struggle of Sexual Minorities Explaining how to challenge the discriminatory attitudes that remain rampant throughout the world, Mary Robinson, UN High Commissioner for Human Rights, in a recent article, quotes the incisive words of Archbishop Desmond Tutu: "We are all of equal worth, born equal in dignity and born free and for this reason deserving respect. . . . We belong in a world whose very structure, whose essence, is diversity almost bewildering in extent, and it is to live in a fool's paradise to ignore this basic fact." The archbishop's words lay bare an essential, wonderful truth about humanity, ignorance of which continues to create suffering for people everywhere. One group of people for whom the question of respect for diversity and individual freedoms comes into stark relief are those belonging to so-called sexual minorities. The struggle for acceptance by sexual minorities is almost universally undertaken in the face of strong and often even violent prejudice and misunderstanding. This year, from March 8--11, SGI-USA held its first Gay, Lesbian, ...

Fashion in 20 Years

Erika Annalisa Sagh 2MEI 20 years of change? The over abundance in brands, the constant development for new products and the continual demand for innovation in style, will certainly remain relevant in 20 years as much as it does today. Fashion will develop quickly in the fields of production development and undoubtedly work forward instead of reliving the passed. However, the most intriguing changes in the fashion world within the next 20 years will be noticeable in the domains of manufacturing and sustainable revitalization of products and how they will connect.In application of the current European crisis it is clear that people are becoming more conscious of where there money is being spent and how they can possibly save more wisely. The morality behind the importance of helping and supporting your own economy will forever remain, though whether it will be practiced may technically be but a theory. Western cultures will continue to seek cheap manufacturing alternatives in second a nd third world countries, because it offers the possibility to over-produce and support the fast fashion addiction.As the evolution in economy triggers a direct growth within the field of manufacturing, the everlasting demand for innovating and luxurious goods will incline as well. These points all aid in allowing actual consumption within the coming years to multiply from its current state. If the future predicts to experience a noticeable growth of consumers, rising to approximately 1. 8 billion, it would be of no surprise that more brands will emerge and companies will be looking into producing their garments and products more quickly to feed the demand.The demand will undoubtedly create an abundance of opportunities for the fashion industry, as developments in style, textile and processing will be forced to transpire. However, as a state for humanity these so called windows of opportunities will possibly not create revolutionary changes. Accounting China’s current regress ion in foreign manufacturing demand, a shift from this current fashion driven country to another developing country may occur.The demand from western-based countries to China is slowly diminishing based mainly upon the fact that quoted prices have elevated beyond comfort. Though China is beginning to manage their organizations better, it raises some issues of whether western demand will remain located or as previously mentioned, shift. China does expect their economy to grow within the upcoming years, however this growth may account solely for domestic demand. In order to continually be apart of the fashion realm, China may have to keep their prices low or have the government interfere.More of the Chinese population is gradually becoming less interested to work in factories, while more comfortable positions within a store or hotel are sought after. In short, as the country grows away from the communistic regime the people will desire a much more comfortable lifestyle away from poor conditions and factory work. Now it is not to say that the manufacturers in other upcoming worlds wont be categorized as sustainable. It’s a known fact that the fashion industry is classified as one of the most polluting industries in the world, and much more focus is now being spent on how to change this.From the amount of fertilizer used in cultivating cotton to the abundant quantity of chemicals exhausted in processing plants, it is evident that the creation of fashion is drastically aiding in the progression of global warming. Though due to the size of the industry, any small changes such as the conservation of fresh water or the protection of environmental status would help. Eva Kruse, Chairman of the Nordic Fashion Association has already begun gathering support from celebrities and international designers to discuss sustainable options.With already 1000 people aboard, their long-term goal is to eventually declare sustainability as a worldwide fashion value. Though they aspire to soon take part in united nation conferences and create a code of conduct for the industry, the possibility of eliminating cheap manufacturing is nearly impossible. It is not saying that if the sector reacts to aspects of this code that it will not create a great impact, but that redesign, reuse and recycle will take precedence over fair wages. Clothing will be designed using biodegradable materials such as bamboo, milk or recyclable plastics and polyester.Clothing will no longer be apart of landmass and the environment itself will be considered more green and clean. However as stated, the use of these materials is undoubtedly more expensive to produce and manufacture into garments. Sustainable machinery will become more expensive to buy and maintain, while health codes, which will be implied, will also account for a raised budget. Since it will be the big companies, which will drive the demand they will be able to influence the consumers to agree with sustainability but p erhaps not price.Prices can fluctuate gradually, however the public will never agree to pay ridiculously high amounts. As fast-fashion will not fade within the near future, people will still demand new seasons and more collection in order to satisfy their materialistic and trendy needs. Companies will have to agree in saving money through cheaper labour and not expect all products to be produced closer to home. Countries such as India, Bangladesh and Cambodia will most likely become visited terrain for production instead of China, whereas the likeliness of African labour is more questionable due to the unstable status of the government and disruption.In conclusion, there are many solutions available in creating a more sustainable fashion industry, however these solutions may be quicker to realize than the issue of fair trade itself. I believe that people are not ready to give up their addiction to buying, and fast fashion is not just a trend but also a new way of life. The idea of m inimalistic buying will have to develop slowly within society, it may visible in 50 years but 20 years seems too soon. The categorized second world countries such as China are progressively becoming first world and it is unsurprising that their production price quotes are higher than before.I believe that if the fashion industry takes a strong shift towards sustainability that affordable manufacturing in second and third world countries will be sought out, to balance and maintain â€Å"cheaper† ticketed prices. In the future, the world may look different because certain countries, which are currently related directly to fashion, may disappear or even change their status, while new countries will appear in order to realize this sustainable aspiration. First step, be kind and save the planet we live on. Second step, find a way to live in a fair trade world.